Abra nossa App de graça!

$3 OFF para 1º Pedido.

Abre APP
Tronxy XY-2 Pro 24V Instalação Rápida De Impressora 3d Impresora Um Toque De Cor 255X255X260MM
Tronxy XY-2 Pro 24V Instalação Rápida De Impressora 3d Impresora Um Toque De Cor 255X255X260MM
Tronxy XY-2 Pro 24V Instalação Rápida De Impressora 3d Impresora Um Toque De Cor 255X255X260MM
Tronxy XY-2 Pro 24V Instalação Rápida De Impressora 3d Impresora Um Toque De Cor 255X255X260MM
Tronxy XY-2 Pro 24V Instalação Rápida De Impressora 3d Impresora Um Toque De Cor 255X255X260MM
Tronxy XY-2 Pro 24V Instalação Rápida De Impressora 3d Impresora Um Toque De Cor 255X255X260MM
Tronxy XY-2 Pro 24V Instalação Rápida De Impressora 3d Impresora Um Toque De Cor 255X255X260MM
Tronxy XY-2 Pro 24V Instalação Rápida De Impressora 3d Impresora Um Toque De Cor 255X255X260MM
Tronxy XY-2 Pro 24V Instalação Rápida De Impressora 3d Impresora Um Toque De Cor 255X255X260MM
1/1
180.60€
389.99
Salve um extra 0 para usar o aplicativo
16 Comentários

Tronxy XY-2 Pro 24V Instalação Rápida De Impressora 3d Impresora Um Toque De Cor 255X255X260MM - XY 2PRO UK

Cupão:

promoção:

Suporte ao pagamento COD

Armazém e Taxa

Selecionar
P-1000:Envio entre: Sep 22 - Sep 27

Opções do Produto

Selecionar
XY 2PRO UK
Visite a Loja

Comentários (16)

Andreas
Aug 07,2020
+Die Maschine liefert im allgemeinen gute Drucke. ++ Alles was ich gedruckt habe, kam mit einer hohel Qualität von der Maschine.Doch es gab einige kleine Mängel.-Eines der Laufräder an der X-Führung scheint ein angeschlagenes Kugellager zu haben.Doch das scheint die Qualität der Drucke nicht zu beeinflussen.--Ein etwas größerer Mangel ist, dass die Maschine in der Z-Achse ein Spiel von etwa 0,3 mm hat.Das merke ich beim Z-Leveln. Wenn ich 0,1 mm schritte nach unten fahre, bis das Papier klemmt, dann muss ich mindestens 0,3 mm wieder nach oben fahren, biss es wieder leichter verschiebbar ist.--Die Kabel und Filamentzuführung von Extruder zum Hotend ist nicht richtig durchdacht.Die Maschine hat einen Arbeitsraum in der Z-Achse von 260 mm. Heute habe ich etwas Gedruckt, das 220 mm hoch war und die Kabel und Filamentzuführung schien schon zwischen der oberen verstrebung und Schlitten gefährlich gebogen zu werden.-Das einfädeln des Filaments durch den Sensor und dann in den Extruder, kann teilweise schwierig sein, wenn man das Filament nicht zuvor sehr gerade biegt.---Der größte Mangel den ich festgestellt habe, ist die ungünstige Positionierung des unteren Kühlventilators, der die Elektronik kühlt. So dicht über der Tischplatte wirkt das wie ein Staubsauger und saugt den kleinsten Schmutz sofrt auf.Trotz all dieser Mängel, ist die Qualität der Maschine so hoch, dass es mir 4 Sterne wert ist.Beseitigt noch die kleinen Designfehler, die das Arbeiten mit der Maschine erschweren und die Lebensdauer mancher TTeile mindern und ihr werdet ein top Produkt haben.
Ver Mais

Descrição

Principais características

https://www.gearbest.com/store/6524581771153096704.html
entrar na página principal, ver mais produtos com desconto e impressoras 3D baratas.

Ofertas de redução total (limitado a 20 pessoas):
A série D01 custa mais de US $ 350 menos US $ 50.
https://www.gearbest.com/3d-printers--3d-printer-kits/pp_3008227925854778.html?wid=2000001#goodsdetail

Ofertas Compre um leve um (limitado a 30 pessoas):
Compre X5SA, XY-2PRO, D01 e outros modelos, ou seja, dê o hot end no valor de 16 dólares.

Ofertas de combinação (limitado a 50 pessoas):
X5SA, XY-2PRO, D01 com hot end, Filamentos, qualquer combinação é mais favorável.
https://www.gearbest.com/3d-printers--3d-printer-kits/pp_3009656848488912.html?wid=2000001
https://www.gearbest.com/3d-printers--3d-printer-kits/pp_3002823284920474.html?wid=2000001
https://www.gearbest.com/3d-printers--3d-printer-kits/pp_3008227925854778.html?wid=2000001#goodsdetail

Grande promoção (limitado a 5 pessoas):
O preço original do C2 era US $ 498, e o preço da DEAL é US $ 159,99.
https://www.gearbest.com/3d-printers--3d-printer-kits/pp_3004263544588878.html?wid=2000001

Especificação

Tamanho da embalagem (L x L x A)
52*49*25CM
Pesos De Pacote
12KG
conteúdo do pacote
Suporte superior, Base, Tela sensível ao toque, Suporte de filamento, Especificação, HM5 * 50 4PCS, Ferramentas, Pá, Linha de alimentação, cabo USB, Adesivo, Painel de fibra de vidro, leitor e cartão SD, Filamento de amostra 0,25 KG, bico de 0,4 mm, clipes, conector rápido M6, Gravata
Veja mais

Ver Mais 

Produtos em Destaques

Produtos Patrocinados

Bônus para novos membros: cupom de US $ 10
180.60€

Tronxy XY-2 Pro 24V Instalação Rápida De Impressora 3d Impresora Um Toque De Cor 255X255X260MM

Cor

Navios De

Quantidade - +
Parcelas: escolha
loading...
loading...
cancelar
loading...
loading...
loading...

Comentários

4.94 *****
  • 15
  • 1
  • 0
  • 0
  • 0
  • Todos ( 16 )
  • ( 7 )
  • ( 0 )
Andreas
Aug 07,2020
+Die Maschine liefert im allgemeinen gute Drucke. ++ Alles was ich gedruckt habe, kam mit einer hohel Qualität von der Maschine.Doch es gab einige kleine Mängel.-Eines der Laufräder an der X-Führung scheint ein angeschlagenes Kugellager zu haben.Doch das scheint die Qualität der Drucke nicht zu beeinflussen.--Ein etwas größerer Mangel ist, dass die Maschine in der Z-Achse ein Spiel von etwa 0,3 mm hat.Das merke ich beim Z-Leveln. Wenn ich 0,1 mm schritte nach unten fahre, bis das Papier klemmt, dann muss ich mindestens 0,3 mm wieder nach oben fahren, biss es wieder leichter verschiebbar ist.--Die Kabel und Filamentzuführung von Extruder zum Hotend ist nicht richtig durchdacht.Die Maschine hat einen Arbeitsraum in der Z-Achse von 260 mm. Heute habe ich etwas Gedruckt, das 220 mm hoch war und die Kabel und Filamentzuführung schien schon zwischen der oberen verstrebung und Schlitten gefährlich gebogen zu werden.-Das einfädeln des Filaments durch den Sensor und dann in den Extruder, kann teilweise schwierig sein, wenn man das Filament nicht zuvor sehr gerade biegt.---Der größte Mangel den ich festgestellt habe, ist die ungünstige Positionierung des unteren Kühlventilators, der die Elektronik kühlt. So dicht über der Tischplatte wirkt das wie ein Staubsauger und saugt den kleinsten Schmutz sofrt auf.Trotz all dieser Mängel, ist die Qualität der Maschine so hoch, dass es mir 4 Sterne wert ist.Beseitigt noch die kleinen Designfehler, die das Arbeiten mit der Maschine erschweren und die Lebensdauer mancher TTeile mindern und ihr werdet ein top Produkt haben.
Biker Budy
Jun 06,2019
Ok so let’s start out with saying this is not my first 3d printer that being said it was the easiest to put together. From the time I opened the box to the start of the first print was one hour and 20 mins. Part of that was unboxing and making sure I had everything. It took about 20-30 min to put it together. Then leveling the bed wow this has to the easiest bed I have ever leveled. Then I started the first print. Of course I pick one off the micro-SD card provided with the printer and it was a 10hr print. In this print I used the power-loss and resume feature it worked great. I also used the filament out feature and it worked great. I use the filament out feature a couple of times to change colors on the print was so easy to do. I did have a problem I had to contact tech support on and they got back to me in a couple of hours, on my other printers it would have been days or weeks so this is great.Pros.Prints up to 100mm/sTouch screen32bit control board with resume on powerlossFilament out detectionHeated bedAll metal buildEasy to get parts for if you want to modEasy to assemble
Laurent Rouchairoles
Jun 20,2019
My first printer was a Delta and gosh was it a pain to assemble than get it to work. However the Tronxy is remarkably easy to assemble. There are many YouTube videos available online for people who are total newbies. For me due to my schedule it took a couple of days to get it up and running but for a beginner it should take no more than 3-6 hours.After the first print of traffic cone that got messed up due to some reason I started using tape on the build plate and that has worked out much better for me.Pros.Plenty of videos online for newbies.Few steps of assemblyTouch screen - very easy and quick functioningSupport email is responsive.Spare screws given.Cons.Instructions on the sheet aren't greatest for someone who's vanilla to 3D printing.I would certainly recommend this printer. Great for the price
Aidan McCarthy
Jun 20,2019
When I first ordered this 3d printer there was a mix up at the distribution center, I didnt recieve it in the mail.After contacting tronxy they swiftly assisted me and got another one sent out. They also included some extra filament for my troubles.I had a few issues with cooling the controller and when I brought this concern to their staff they sent me a small fan that cools it down.This printed has its little quirks but if you're willing to tinker around with it, it's a great 3d printer for the money!If you ever have any troubles with it shoot their team an email, I would always get a response back in about 10 minutes!One person found this helpful
Jason
Sep 01,2020
What an incredible value, this is my third 3d printer, the assembly was incredibly easy, the material quality is great with a solid aluminum chassis for great rigidity that holds level and true, the auto leveling and filament detection system, the removable flexible build plate.I can honestly say IMPRESSED, and an incredible value.Thanks guys this changes my whole 3d printer outlook for entry level printers that provide so much value at an affordable price. Also shipping and customer service was excellent.Couldn't be happier.
Marek Swiderski
Jun 20,2019
The Tronxy XY-2pro is a great printer. I printed a test cone and it came out smooth. At first the printer needed a few adjustments such as belt tightening. As a couple failed prints and the adjustments its prints great. Tronxy also has great customer support and they walked me through any issues i had. The touch sceen is really responsive and it allows you to adjust the printer settings (temp, speed, extrusion) even during a print.
Iron - K
Feb 06,2020
commande recu en 4 joursmontage 30 minutesle tout pret regler reglage tres corectimpression tres belle toute les infos infos montagedans la SD je recommande ce vendeur et cette imprimante merciorder received in 4 daysassembly 30 minutesall ready to settlevery correct settingvery beautiful printall the infomounting infoin the SDI recommend this seller and this printerthank you
Titea Razvan
Jun 20,2019
I have had several printers through the years. This has been my favorite so far. With the touch screen LCD , it feels very top of the line.Build took about an hour the print quality is fantastic. I took the time to tune the extruder out of the box and it was very close so I left it for the time being.One person found this helpful
Yaning Song
Jul 03,2019
My friend recommended me to buy the machine, but many of them were not satisfactory for the first time of printing. Fortunately, I got the guidance from my good friend Ralph, who let me quickly get started. Everything turned out to be so simple.
Martin Michnik
Jun 20,2019
I have an XY-2 machine. As an upgraded version of XY-2, I'm looking forward to coming to me. The printing effect of XY-2PRO is ideal.
Ver Mais
Ver Mais
Ver Mais