Abra nossa App de graça!

Aproveite ofertas exclusivas.

Abre APP
Zonestar P802QR2 Extrusoras Duplas de 3D Impressora DIY Kit
Zonestar P802QR2 Extrusoras Duplas de 3D Impressora DIY Kit
Zonestar P802QR2 Extrusoras Duplas de 3D Impressora DIY Kit
Zonestar P802QR2 Extrusoras Duplas de 3D Impressora DIY Kit
Zonestar P802QR2 Extrusoras Duplas de 3D Impressora DIY Kit
1/1

Zonestar P802QR2 Extrusoras Duplas de 3D Impressora DIY Kit - Prata Tomada EU

Veja tradução
242.66€
266.36
12 Comentários

Cupão:

promoção:

Suporte ao pagamento COD

Armazém e Taxa

Selecionar
CN-099:Envio entre: Sep 23 - Sep 25

Opções do Produto

Selecionar
Prata Tomada EU
Visite a Loja

Comentários (12)

Marco
Jun 09,2018
Autolevel seems very important as aluminium bed is not perfectly flat.Stainless metal frame provide establility and durability, only z sliders are 3d printed.Dual extruders for the price of one ;)Issues from P802Q R1 fixed.Look for reviews on forums and youtube, there is a lot of good stuff to check.Good documentation for newbies (assembly, calibation and slicing).Zonestar support returned my fist e-mail in 7 days (including weekend) and he reply the folowing e-mails in 24 hours max. Nicely and helpfull.
Ver Mais

Descrição

Aviso Legal:

● Por favor, leia e siga atentamente o manual do usuário antes de montar ou operar a impressora 3D.

● A modificação e personalização da impressora 3D são estritamente proibidas. Não nos responsabilizamos por quaisquer problemas resultantes de modificações.

● Sempre use a tensão AC correta para sua região.

● Por favor, não coloque a impressora 3D perto de materiais inflamáveis / combustíveis ou de fontes de calor.

● Use a impressora 3D somente em áreas adequadamente ventiladas. Mantenha uma distância segura da impressora.



Principais características:

● Montagem extremamente simples, alto desempenho

● Estrutura de estrutura de metal proporciona um ambiente de trabalho mais estável

● Suporte a impressão off-line e função de nivelamento automático

● Com nivelamento automático de plataforma e detecção de altura

● Impressão em duas cores com extrusoras duplas

● Extrusora de EM4 Bowden, fácil de carregar o filamento, pressão ajustável e filamento flexível do apoio

● Módulo fixo do parafuso de avanço do eixo Z

● Novo quadro hot end atualizado, acesso mais fácil a construção mais rápida

● 500mW - gravador de laser atualizável selecionável de 2500mW

● Tudo em uma placa de controle de solução eletrônica, compatível com RAMPS V1.4, MKS V1.3, ATMEGA2560 MCU, 5 conectores de drivers de motor, 4 chaves MOSFET, 3 conectores AUX e suporte para atualizar mais recursos


Especificação

Geral

Marcas: ZONESTAR
Tipo: DIY
Modelo: P802QR2
material do Quadro: Estrutura de chapa metálica
Quantidade de bocal: Duplo
Diâmetro do bocal: 0,4 milímetros
Produto tamanho formando: 220 x 220 x 240 mm
Espessura da camada: 0.1-0.36mm
Impressão offline do cartão de memória: SD cartão
Tela LCD: Sim
Velocidade de impressão: Max 150mm / s
Material de apoio: ABS,PLA flexível,PETG,PLA,PVA,Madeira
Diâmetro de material: 1,75 milímetros
Língua: Chinês,Inglês,Português,Espanhol
Formato de arquivo: G-code,OBJ,STL
Precisão de posicionamento XY-eixo: 0,012 milímetros
Precisão de posicionamento do eixo Z: 0,0025 milímetros
Poder de trabalho: 250W
software de computador Host: Repetidor-Host
peso do produto: Embalagem desmontada
Sistema Suportado: Windows, Linux, Mac.
Intervalo de tensão: 100 - 220V
Certificado: CE,FCC,RoHs

Dimensões e Peso

Peso do Produto: 7.6000 kg
Peso do Pacote: 9.4000 kg
Tamanho do Produto: 46,00 x 42,00 x 42,00 cm / 18,11 x 16,54 x 16,54 polegadas
Tamanho do Pacote: 58.00 x 48.00 x 12.00 cm / 22.83 x 18.9 x 4.72 polegadas

Conteúdo da Embalagem

Conteúdo de Embalagem: 1 x Zonestar P802QR2 3D Impressora DIY Kit

Zonestar P802QR2 Extrusoras Duplas de 3D Impressora DIY Kit- Prata Tomada EU


Produtos em Destaques

Produtos Patrocinados

Bônus para novos membros: Cupão de $50
242.66€

Zonestar P802QR2 Extrusoras Duplas de 3D Impressora DIY Kit

Cor

Tamanho

Quantidade - +
Parcelas: escolha
loading...
loading...
cancelar
loading...
loading...
loading...

Comentários

4.58 *****
  • 8
  • 3
  • 1
  • 0
  • 0
  • Todos ( 12 )
  • ( 5 )
  • ( 2 )
Marco
Jun 09,2018
Autolevel seems very important as aluminium bed is not perfectly flat.Stainless metal frame provide establility and durability, only z sliders are 3d printed.Dual extruders for the price of one ;)Issues from P802Q R1 fixed.Look for reviews on forums and youtube, there is a lot of good stuff to check.Good documentation for newbies (assembly, calibation and slicing).Zonestar support returned my fist e-mail in 7 days (including weekend) and he reply the folowing e-mails in 24 hours max. Nicely and helpfull.
Sugestão:
Z Slides was not very nicely printed, it is a little curved and I cracked when I mount, I had to keep only one screw in the the cooper nut with to avoid stuck the stepper. But you can easily print the replacments as zonestar provide all STL files.Linear bearing seem noisely, I'm considering to try an good clean up or replace it.For the price, the cons is not so impressive as for most of 3d printer kits
Bogu
Jan 31,2018
- CHEAP! - metal frame --> no melting from whatever - newest heating bed (MK3, Alu) - Prusa i3 clone --> huge community - solid machine, if you assemble everything correctly you got a nice and stable printer
Sugestão:
- AC Adaptor: cable directly above power switch - reachability of ZRIB- (control-) Board is´nt that good so for the first tweaks after assembly you need small, long and powerful fingers... - included auto leveling sensor is not good... (but maybe im just too unexperienced) ALL THESE CONS ARE REALLY SMALL! If you keep thinking and trying you´ll fix all that problems.
Sam
Jan 02,2018
Very good overall 3D printer. The dual extruder makes it convenient for printing soluble support. The metal frame makes the printer stronger (and better looking in my opinion). The SD Card is easily accessible from the back of the LED display panel instead of being on the mother board like most other 3D printers.
Sugestão:
The Extrudes were particularity hard to assemble. It took me a while to have them properly extrude the material. The problem is that the spring they give you is often too small, therefore you need to take some pliers and stretch it as much as you can in order for them to give the proper "push" to the extruder lower part. Also, on a minor point, the two material roll brackets are meant for 500g rolls. The majority of 1kg rolls will be too wide and too heavy for the brackets.
LJ
Mar 15,2018
-Build quality is very good, holes line up on the stainless steel frame had no problems with assembling. -A lot of extra screws after assembly that can be used for upgrades. -Some extra wires included -print quality is very good and the printer is easy to use -accuracy is very good
Sugestão:
-struggled quite a bit as my stepper motor controllers started overhearing when I started, a cooling fan needed to be added to cool the motherboard and controllers - on off switch needs to be moved, not a big problem as it was quite easy to make my own design and designs are available on thingiverse. - temperature control on the nozzle far away from the cooling fan is a bit of a problem that I still need to solve.
Chris
May 17,2018
A good introduction to dual extruder printers with a straight forward build process. The price is pretty good for a dual extruder printer kit.Support was good from Zonestar when I had issues.Issues were fixed relatively easily
Sugestão:
Build plate wasn't flat and although Zonestar's support show you how to fix it (which was adding layers of tape), I ended up putting an Anycubic Ultrabase on mine.One of the X-axis rods was too loose a fit.While the frame is all metal, it requires bracing to make it sturdy.The stepper drivers needed tweaking with a multimeter to reduce the factory set voltage as they were too high and overheated causing movement errors.
CS
Mar 15,2018
good valueseperate temperatures for each hot endmetal framewell packaged after tuning can print quite well
Sugestão:
unclear build instructionsfaulty parts. y-axis bracketdrivers where not set to proper voltage needed much work to print properlylinear bearings need lubricationsome rods were warped
LJ ZA
Aug 16,2018
This is the first 3d printer I bought and I am very happy. I have had this printer now for 6 months and it is still going strong.
Didier
Aug 19,2018
Works well but requires some time to learn how to use.I would recommend this product only to people able to tackle with technical matters Note : The manual recommends to use Repetier as a slicer, but I got good results with Cura
Bernhard
Feb 11,2019
I like the price, assembly is a few hours, the printer gets good results with only minor tweaking.
francesco
Feb 07,2019
richiesto rimborso parziale non ottenuto dopo 10gg il monitorino lo avrebbero mandato non si sa quanto....

francesco:

Thank you for your recent order.

We are sorry to hear that you have the issue for your item.

After-sales issues can be resolved through our Support Center within 24 hours.

Please kindly review our warranty policy here:https://www.gearbest.com/about/warranty-and-return.html

Best regards,

Gearbest.com

Mar 22,2019

Ver Mais
Ver Mais
Ver Mais